Visonic POWERMAX - Specifications download pdf (Page 26)

26 D-300885

4.14 CALLING UPLOAD/DOWNLOAD SERVER

Note:

This option is only used during the installation of panels

monitored by compatible central stations.

This option allows the installer to initiate a call to the

upload/download server. The server uploads the

PowerMaxComplete configuration to its data base and can

unload predefined parameters to the PowerMaxComplete .

Displayed for half

a minute approx.

accompanied by sad

(failure) melody

Displayed for half

a minute approx.

accompanied by sad

(failure) melody

Displayed for half

a minute approx.

accompanied by sad

(failure) melody

READY 00:00

USER SETTINGS

NORMAL MODE

ENTER CODE

1. NEW INSTL CODE

2. ENROLLING

3. DEFINE ZONES

5. DEFINE COMM

[installer code]

INSTALLER MODE

4. DEFINE PANEL

COMMUNICATING TEL # NOT DEFINED

DOWNLOADING DIAL ATTEMPT FAIL

DOWNLOAD OK DOWNLOAD FAILED

Displayed during

dialing process

If UL/DL server

tel. # was not

defined before

(see par. 4.5.34)

If UL/DL server

tel. # is already

defined (see

par. 4.5.34)

Dialing

failed

Download

failed

Displayed during

download process

Displayed for half

a minute approx.

accompanied by happy

(success) melody

8. DEFINE OUTPUTS

9. DEFINE VOICE

10. DIAGNOSTICS

11. USER SETTINGS

12. FACTORY DEFLT

13. SERIAL NUMBER

<OK> TO EXIT

14. START UL/DL

6. DEFINE GSM

Figure 4.14 – Start UL/DL

5. TESTING PROCEDURES

5.1 Preparations

Make sure all windows and doors are closed. If all zones

are secured (undisturbed), the display should read:

READY HH:MM

If the display is “NOT READY”, query the control panel by

pressing the

button repeatedly. The source(s)

of the problem(s) will be displayed and read aloud. Take the

necessary measures to eliminate the problem(s) before

testing the system (see next paragraph).

5.2 Diagnostic Test

To verify proper function of all detectors in the system, a

comprehensive diagnostic test is required. To perform this

test, refer to figure 4.10.

5.3 Keyfob Transmitter Test

Initiate transmission from each transmitter enrolled as a

keyfob unit (according to the list in Table A2, Appendix A).

Use each transmitter to arm the control panel AWAY and

immediately disarm it. Upon pressing the keyfob unit’s

AWAY key, the ARM indicator should light.

The display should respond as follows:

ARMING AWAY



PLEASE EXIT NOW

The exit delay beeps will begin.

Press the keyfob unit’s DISARM (

) key. The ARM indicator

should extinguish, the announcement “Disarm, ready to arm"

should be heard and the display should revert to:

READY HH:MM

Test the AUX button in each keyfob in accordance with the

information noted in Table A.2, Appendix A. Verify that the

AUX button performs its duty as programmed.

 If the AUX (

@) button is defined as “STATUS”, system

status should be displayed and announced upon

pressing the button.

 If the AUX (

@) button is defined as “INSTANT”, press

the AWAY button and then the AUX button. The

response should be:

ARMING INSTANT

(alternating)

PLEASE EXIT NOW

and the exit delay beeps will start. Press the DISARM ( )

key immediately to disarm.

 If the AUX (

@) button is programmed as “PGM” and

permitted to activate the PGM output, pressing (

should activate the device wired to the PGM output.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comments to this Manuals

No comments

Visonic POWERMAX - Specifications Page 26

Comments to this Manuals

Related products and manuals for Carbon monoxide (CO) detectors Visonic POWERMAX -