Visonic AMBER SELECT User's Guide download pdf (Page 7)

D-301438 AMBER SELECT / AMBER SELECT

USER’S GUIDE 7

MOUNTING THE UNIT

The Unit can be located on a table, or on a wall. In both

cases the Unit should be near an electrical outlet and

phone line.

Mounting on a Table

(Fig. 4)

Insert the AMBER SELECT / AMBER SELECT

stand

into the holes (see illustration below) and place the

AMBER SELECT / AMBER SELECT

on a table.

Figure 4 – Table Stand Mounting

Note: The table stand can be easily disassembled by

inserting a screwdriver into the rib space of the stand and

with the screwdriver pulling the stand away from the unit.

Mounting on

the Wall

Drill 2 holes in the

mounting wall and

insert wall anchors.

Insert 2 screws in the

wall (leave a 5 mm or

0.2 inch gap between

the screw heads and

the wall).

Mount the AMBER

SELECT / AMBER

SELECT

on the

screws as shown in the

illustration.

Figure 5 - Wall Mounting

BATTERY REPLACEMENT

Open battery compartment cover see Figure 6. Insert

one 8-battery pack and connect its connector to the

AMBER SELECT / AMBER SELECT

receptacle. Route

the wire as shown in Figure 6.

Battery

Compartment

Cover

Figure 6 – Replacing the Battery

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Comments to this Manuals

No comments

Visonic AMBER SELECT User's Guide Page 7

Comments to this Manuals

Related products and manuals for Fire protection Visonic AMBER SELECT